top of page
Sand Hood Early Clocks.jpg
Sand 1695 Early Clocks.jpg
John Sanderson 1695 Early Clocks.jpg

John Sanderson's earliest known 8-day clock. An historically important (for Wigton) 17th century 8-day clock day clock by John Sanderson of Wigton, c1690s.  Photograph by Lee Borrett

Sand 1 Move Whole Side A WEB.jpg

John Sanderson 

of

Wigton, Fecit 

A very rare 17th century 8-day religious versed longcase clock by John Sanderson of Wigton which dates from the early 1690s and is Sanderson's earliest known surviving 8-day clock to come to light so far, thus making it an historically important clock for the Wigton region. The eleven-inch square dial has verses to the top two corners and to the dial centre. The chapter ring markings, consists mainly of meeting arrowheads and ' C ' scrolls (typical for this period). The outside chapter ring numeral markings have lovely curly tails to the 5s and the letter S (strike) which is a rally nice early feature. The chapter ring is signed ' John Sanderson of Wigton Fecit '. The date calendar is interesting in that it is set within an ' eye ' just like the primitive John Ismay clock which is also illustrated on this site. The dial centre is very busy having ringed winding holes, ringed seconds ring, ringed date calendar and ringing around the centre arbour. Below the seconds ring there is the verse ' Memento Mori '  ( Bear Death in Mind) and in the top two corners there are verses which read ' As time and cllock and all things pass away ' and ' A mend your lives for here wee must not stay '. Sanderson has also signed his name on the reverse side of the chapter ring.

John Sanderson 1695 Early Clocks.jpg

Above Wonderfully interesting eleven inch square brass dial of the early John Sanderson religious versed 8-day longcase clock. Dating from the early c1690s.  Photograph by Lee Borrett

Below. Showing a close-up of the busy dial centre, with the engraved religious verse ' Memento Mori', seconds ring and round date calendar. Sanderson was also using the Westmoreland calendar wheel on his early 8-day examples.  Photograph by Lee Borrett

Sand 1695 Dial Centre WEB Instagram.jpg

Meeting arrow heads with  'C ' scrolls, for half-hour markers plus the inclusion of the word ' of ' in his signature, are all features of John Sanderson's earliest known work, which I believe date from the early 1690s. Sanderson seems to have stopped using this type of half-hour marker about c1695 and then dropped using 'of' in his signature around c1698 when he was using a new style of half hour markers. I now know of four examples (including a true Lantern clock by Sanderson) that all have these features on their chapter rings. Interestingly, John Ogden (who Sanderson is thought to have trained under) was also using meeting arrow heads with  'C ' scrolls, for half-hour markers on his dials during the early 1690s and it makes sense to me that Sanderson would have used this type of half-hour markers on his earliest dials before using his own unique style which he did.

Sand 1695 Left Corner A Early Clocks.jpg

Above The top left dial corner reads:-  ' As time and cllock and all things pass away ' Photograph by Lee Borrett

Sand 1695 Right Corner Early Clocks.jpg

Above. The top right hand dial corner reads:-  ' A mend your lives for here wee must not stay ' Photograph by Lee Borrett

Sand 1695 Signature A Web Instagram.jpg

Above. Meeting arrow heads with  'C ' scrolls, for half-hour markers plus the inclusion of the word ' of ' in his signature, are all features of John Sanderson's earliest known work, which I believe date from the early 1690s. ' Photograph by Lee Borrett

Below. Showing the dial of another very early Sanderson clock. This time a 30-hour, but with the same type of meeting arrow heads with 'C ' scrolls, for half-hour markers plus the inclusion of the word ' of ' in his signature. Date early 1690s. Photograph courtesy of private Collector

CL3.jpg

Below. Showing a very rare true lantern clock by John Sanderson (later converted to fusee movement). Dating from the early 1690s is has again got the same type of meeting arrow heads with 'C ' scrolls, for half-hour markers plus the inclusion of the word ' of ' in his signature. Photograph courtesy of private Collector

sig (1).jpg

Below. Showing the Five-finned and ringed pillar movement of the early John Sanderson 8-day longcase clock. It retains all of its original wheel work and collets has repeat works. It has an early form of rack striking and also has a strike silent feature. Photographed by Lee Borrett

Sand 1 Move Whole Side A WEB.jpg

Below. Showing a close-up of the finned and ringed brass pillars. Note that Sanderson has shaved the bottom pillar one end to give enough clearance for the winding wheel. Photographed by Lee Borrett

Sand 6 Move Side B WEB.jpg

Below. Showing a close-up of some practice engraving by John Sanderson on the back of his chapter ring. Photographed by Lee Borrett

Sand 5 Practice engraving A web.jpg

Below. Showing a rear view of the early John Sanderson 8-day movement. Note the fancily shaped lever for the repeat works. Photographed by Lee Borrett

Sand 4 Move Rear A Web sharp.jpg

The clock is housed in a heavily built and very interesting pannelled oak case.  The trunk door is pannelled and is held in place by two primitive iron blacksmith hinges. There are two more oak panels below the trunk door and a further panel to the base. Originally the case may have been made to match a pannelled room.

Sand Hood Early Clocks.jpg
Sand 1695 Early Clocks.jpg

Right. The trunk door is pannelled and is held in place by two primitive iron blacksmith hinges. There are two more oak panels below the trunk door and a further panel to the base. Originally the case may have been made to match a pannelled room. Photographed by Lee Borrett

F999.jpg

John Sanderson was born in 1671 and was brought up at Tiffinthwaite Farm (near Wigton) where his father Robert was the blacksmith and they probably lived in the outbuildings on the farmland. It is believed that he may have served an apprenticeship under the Quaker Clockmaker John Ogden at Bowbridge in Yorkshire during the 1680s. He was back living and working as a Clockmaker at Tiffinthwaite from about 1691. John Sanderson was the founding member of what has become known as ' The Wigton School of Clockmakers.

Acknowledgement

I would like to thank Brian Loomes for allowing me to use any previously published information and articles on John Sanderson and 'The Wigton Scool of Clockmaking'.

 

Brian Loomes is the authority on John Sanderson. His book 'Brass Dial Clocks' has a whole chapter on The Wigton School. This book is a must for collectors interested in this subject.

bottom of page